Clean room refers to a space with good airtightness that controls air cleanliness, temperature, humidity, pressure, noise and other parameters as required.

(1) The clean environment serves the production process. It is natural that the clean room design must meet the environmental requirements of the production process. Therefore, during the design of the clean room, the requirements of the production process on the environmental parameters should be realistic. The area, floor height, temperature, humidity, cleanliness, etc. should be higher if higher, and lower if lower. Under the premise of not affecting the normal operation of the production process, the parameter requirements shall be reduced as much as possible, the purification area shall be controlled, the scope of the high purification level clean area shall be reduced, and the area of the 100 level and higher level one-way flow clean area shall be strictly controlled. 

(2) In the production process planning, clean rooms of the same level should be arranged together as much as possible, the processes with high cleanliness requirements should be set on the windward side, and the process equipment and containers that produce dust, toxic, harmful, flammable and explosive waste gas should be placed outside the clean area as much as possible. If it is necessary to place them in the clean area, sealing measures should be taken as much as possible to reduce the emission of dust and waste gas.

Jiangsu Rongshida Purification Technology Co., Ltd. is a product of Clean Room Manufacturers and Rock Wool Sandwich Panel. Welcome to our official website.